Zauberwürfel · Cube Solver
Hilfe & Kontakt
Die App löst den klassischen 3×3-Würfel: scannen, Lösung berechnen, Zug für Zug mitdrehen. English version below.
Häufige Fragen
Der Scan löst nicht aus
Halte eine Seite so in den Rahmen, dass alle neun Felder zu sehen sind und der Würfel den Rahmen ungefähr ausfüllt. Gleichmäßiges, helles Licht hilft; direkte Spiegelungen auf den Feldern stören. Wenn die App die Seite trotzdem nicht erkennt, tippe auf „Jetzt aufnehmen“.
Eine Farbe wurde falsch erkannt
Nach dem Scan zeigt die App alle erkannten Farben auf einem 3D-Würfel. Wähle unten die richtige Farbe und tippe das falsche Feld an. Bei wenig Licht werden Rot und Orange oder Weiß und Gelb am ehesten verwechselt.
Die App meldet, dass der Würfel so nicht lösbar ist
Dann passt mindestens ein Feld nicht: Jede Farbe muss genau neunmal vorkommen, und jedes Teil darf es nur einmal geben. Prüfe die Felder gegen deinen Würfel. Bleibt die Meldung, wurde der Würfel vermutlich einmal auseinandergenommen und falsch zusammengesetzt.
Wie halte ich den Würfel beim Lösen?
So, wie die App es zu Beginn zeigt: Weiß oben, Grün vorne. „Im Uhrzeigersinn“ heißt immer: so, als würdest du direkt auf die genannte Seite schauen.
Welche Würfel werden unterstützt?
Der klassische 3×3-Würfel mit den üblichen sechs Farben Weiß, Gelb, Rot, Orange, Blau und Grün.
Wie lösche ich meine Daten?
Einzelne Einträge löschst du im Verlauf durch Wischen nach links. Wenn du die App löschst, sind alle Daten weg. Die App speichert nichts außerhalb deines iPhones. Mehr dazu in der Datenschutzerklärung.
Kontakt
Fragen, Fehler oder Wünsche: julianfleischer97@gmail.com
Help & contact
The app solves the classic 3×3 cube: scan it, get the solution, turn along move by move.
Frequently asked questions
The scan does not capture
Hold one face inside the frame so that all nine stickers are visible and the cube roughly fills the frame. Bright, even light helps; reflections on the stickers get in the way. If the app still does not recognise the face, tap “Capture now”.
A colour was read wrongly
After the scan the app shows all recognised colours on a 3D cube. Pick the right colour at the bottom and tap the wrong sticker. In dim light, red and orange or white and yellow are the most likely to be mixed up.
The app says the cube cannot be solved like this
Then at least one sticker is wrong: every colour must appear exactly nine times, and every piece may exist only once. Compare the stickers with your cube. If the message stays, the cube was probably taken apart once and put together wrongly.
How do I hold the cube while solving?
The way the app shows at the start: white on top, green in front. “Clockwise” always means: as if you were looking straight at the face that is named.
Which cubes are supported?
The classic 3×3 cube with the usual six colours white, yellow, red, orange, blue and green.
How do I delete my data?
Delete single entries in the history by swiping left. Deleting the app removes everything. The app stores nothing outside your iPhone. See the privacy policy.
Contact
Questions, bugs or wishes: julianfleischer97@gmail.com